Ask Experts Questions for FREE Help !
Ask
    boredcravens's Avatar
    boredcravens Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 15, 2008, 05:11 PM
    Need rewiring a Ge Protech thermostat to hunter 4415c
    need help rewiring a Ge Protech to a hunter 44155c programmable thermosat Have an X wire and a Y1 that we cannot figure out
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Apr 16, 2008, 10:57 AM
    Do a rethink,, are you sure you really want a hunter tstat,, if it works at all call yourself lucky and if it holds up very long call yourself even luckier,, they are most all JUNK,spend your hard earned money on a good Honeywell
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring codes from old Carrier thermostat to new Hunter thermostat [ 1 Answers ]

WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...

Rewiring an older hunter fan. [ 6 Answers ]

I tried to look up the answer,but the question I thought might give me the answer,would not load. My question is I have an older hunter fan. Yesterday the light kit fell off and left some wires still connected and some not. It has 2 white wires coming from the fan,one from the light kit.It has one...

Hunter Thermostat [ 6 Answers ]

Just got a Hunter Thermostat my old one s wires are R,G,Y,W,B. the new one is G,RC,RH,Y/O,W/B,Y1. How do you wire this one I wired it like the instruction and AC works but NO Heat?? Help

Rewiring a thermostat [ 3 Answers ]

I want to move my existing thermostat just a few feet away from where it is now. My question regards the new thermostat wire. Is it okay to splice the new wire and the old wire, if it is okay, any suggestion on method of splicing?

Need Help with Hunter Thermostat Please [ 4 Answers ]

I have a Payne PF1MNC hvac, and just replaced my White Rodgers thermostat (It wasn't blowing hot air or kicking in in Auto mode) with a Hunter 44155C. There were 4 wires attached: G to G R to Rh (with jumper) Y to Y1 W to W And an unattached B I attached them the same to the Hunter:

View more questions Search