Bathtub spout replacement

daveboyd Posts: 1, Reputation: 1

New Member

Apr 14, 2008, 10:18 AM

Bathtub spout replacement

Is spout offset equal on all spouts

massplumber2008 Posts: 12,832, Reputation: 1212

Senior Plumbing Expert

Apr 14, 2008, 10:29 AM

Hmmm... Dave... Don't know what you mean by offset..

Are you asking if all tub spouts rough in in same way..

Add your answer here.

Check out some similar questions!

Replacing leaking bathtub spout [ 1 Answers ]

Have made a couple of attempts to replace a bathtub spout. The current spout leaks so bad that there is very little pressure to the shower. The diverter is leaking through the top of the spout and shooting a stream of water up into the air. The problem, when I remove the current spout (unscrew it)...

Removing stuck bathtub spout [ 1 Answers ]

I am trying to remove a bathtub fill spout that has a pipe thread near the water outlet. With a mirror I can see the end of what looks like a copper male threaded fitting. It looks like it has plenty of calcium/mineral buildup. I am hesitant to apply too much force with a lever since the...

Bath tub spout, diverter replacement [ 1 Answers ]

I would like to replace the diverter or spout in my bath tub. The original is the slip on type with a hex screw at the back. The new one is threaded, is there an adapter I can use to make it work ?

How do I remove an old bathtub spout? [ 1 Answers ]

I want to replace the bathtub spout with a new one available at hardware store. I tried unscrewing the old spout barehanded and it won't budge. Can I use a wrench (I don't care if the old spout is marred), or is there a danger of breaking the pipe in the wall. I do NOT have access to the...

Removing bathtub spout - no hole [ 5 Answers ]

Hi, I have read the Q/A's on the site, but can't find an answer to this one. First, I have a Delta faucet. It looks like Delta Faucet T13422-SOS on the www.deltafaucet.com website. (There are a few more that look like this, but it has the diverter plug on the spout.) The difference is that...