Old heater/new thermostat

qy8man Posts: 1, Reputation: 1

New Member

Apr 13, 2008, 11:45 AM

Old heater/new thermostat

I need to know where r,w,c are on my heater

hvac1000 Posts: 14,540, Reputation: 435

Heating & Air Conditioning Expert

Apr 13, 2008, 02:02 PM

They should be right in the heater wiring area.

Add your answer here.

Check out some similar questions!

Central heater comes on when thermostat is on OFF [ 1 Answers ]

My 2nd floor heater has came on 3 times when the thermostat is on OFF. Only thing I changed was the filter 2 weeks ago. Battery is fine. This problem occurred 2 years ago in the summer time and I had the dualzone circuit replaced. Now it's happening again. Basic info: I have dual...

Rheem heater thermostat wiring? [ 1 Answers ]

Hi, I'm trying to figure out the following: The Rheem-Vulcan electrical water heater had a faulty thermostat (part number:051308, 50-70 degrees). I bought the replacement (direct match not available), part number:1317216, 60-75 degrees. The problem is in the fact that the original thermostat's...

Water Heater electric thermostat [ 1 Answers ]

I have a two year old water heater with an electric thermostat attched to the front of the water heater. To change the temp you have to push both the aarows (one blue one red) and hold for about 3 seconds then the LED lights appear and you can change the setting. What has been happening since I...

Changed thermostat now heater won't work [ 1 Answers ]

We changed a white rodgers thermostat out to a honewll round and now in order for the heater to come on you must first turn the fan to the "on" position. The heater will come on but won't turn the fan on so the safety sensors turn the heater off when there is no air flow. I was told that we got the...