Ask Experts Questions for FREE Help !
Ask
    melubinski's Avatar
    melubinski Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 11, 2008, 10:40 AM
    How do we do the electrical for a Microhood?
    We are remodeling our kitchen, and the drywall is about to go up. We haven't purchased a microhood yet, but plan to. There is a hole in the outside wall for venting. We have a wire coming through the wall where the microhood will go. The question is, do microhoods normally come with plugs that just plug into the outlet (should we put an outlet?) or are they wired into the wall, or could we do either? Thanks
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Apr 11, 2008, 10:44 AM
    Many of those type a has cord that comes out of top of Microwave, and will go through upper cabinet, Plug should be in the cabinet above micro and usually on the right side.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Microhood Installation [ 3 Answers ]

I would like to install a microhood with an electric range I just purchased. I am getting conflicting information as to the amount of clearance needed for this. Some people say you need at least 16" from the top of the range elements to the underside of the microhood. Others have said that as...

Microhood installation [ 2 Answers ]

I am having a microhood installed over my electric range and need to know the minimum clearance that's possible so as not to ruin the microhood.

Venting Microhood [ 1 Answers ]

I paid extra money to have my microhood vented outside. The vent is a 3 1/4 X 10, which converts to a 4" and vents outside the townhouse. Everything I read states that it must be at least a 6" round to get the proper CFM. The HVAC guy showed up today and is in total disagreement. He stated it...

Microhood installation [ 7 Answers ]

I am planning to upgrade my kitchen & I want to replace my fan hood with an over the stove microwave oven. The fan hood that is now in place vents to the outside through the house wall. The cabinet over the fan is 18 inches high and I plan to replace it with a 12 inch cabinet to accommodate the...

Microhood vent to outside [ 4 Answers ]

I have a couple quick (hopefully easy) venting questions and I'll provide more details as requested. 1) how does one go about connecting 3 1/4" x 10" ducting together? I want to make a short flange piece that feeds from the inside of the kitchen wall (behind the microhood) heading outside where it...


View more questions Search