Ask Experts Questions for FREE Help !
Ask
    jwikert's Avatar
    jwikert Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 11, 2008, 08:30 AM
    Furnace and A/C Replacement
    My house is 12 years old and during my annual inspection this week the technician tells me my a/c unit is about to die. It's a Carrier system and I noticed the outdoor unit (compressor?) was pretty loud last summer. I recently replaced the blower motor on my furnace and it seems to be operating just fine. Regardless, the technician tells me I probably ought to replace the entire system, a/c and furnace, since they can offer me a better deal for the two together. I can't help but wonder if the furnace is just fine and I should let it go. In fact, when he inspected it last fall he noted how the heat exchange is in great shape, very clean, etc.

    So, what are your thoughts on whether I should do both at the same time?

    Also, he's trying to sell me on one of those UV air cleaners/sterilizers. It will cost an additional $495 for the unit and installation. Are these things really worthwhile or are they just a gimmick?

    Thanks in advance for your answers!
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Apr 11, 2008, 11:58 AM
    ((Also, he's trying to sell me on one of those UV air cleaners/sterilizers)) NOT worth it.

    If you have the money buy a complete system if not just replace the A/C unit.

    The choice is real simple.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacement furnace [ 3 Answers ]

Considering Rheem modulating, however after reading posts online a little hesitant. Being a replacement read that return air is extremely important. Am replacing supply air duct size but contractor said return size of 8 x 14 sufficient.? Is return size as important say as in a two stage...

Replacement for furnace and air conditioner [ 2 Answers ]

Does anyone have a suggestion for a good, reliable furnace and air conditioner?

Replacement Furnace Blower Motor [ 4 Answers ]

Hi, I have an older (~40 years, the original with the house) Coleman furnace. The blower motor (General Electric, 1/6 hp, 110 V, 60 Hz, 3.6 amps, PH 1, 1725 rpm) burnt out the other morning. I went to the local shop (RONA) to find a replacement and they didn't have the exact motor. Instead,...

Furnace replacement [ 2 Answers ]

I have a 50+ yo gas furnace and a 7 yo, fully functional A/C. The furnace has been repaired too many times and the parts are now hard to get. The blower is bad. We have decided to replace the furnace. As the bids came, all of a sudden, the estimates escalated as the majority of the bids...

Furnace Blower Motor replacement [ 3 Answers ]

I have a Comfortmaker furnace with General 90 controller. My blower motor stopped working and when I try to turn it on it gets hot, smells like something burning and no air. Capicator was tested and it is OK. Motor is driving excessive current and just heats up. HVAC technician quoted $700 to...

View more questions Search