Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Dishwasher won't drain
[ 3 Answers ]
I want to unscrew the cover to the motor and pump inside the dishwasher but the screws look different. Not flat or phillips. Do you need a special tool? I have a kenmore elite and have taken the hose off the drain and it looks clear at this end but won't budge when you plunge or force air (I...
Dishwasher won't Drain
[ 2 Answers ]
I have a GE profile dishwasher. The repairman has been to my house 3 times. The first time he cleaned the filter. The second time he said it needed a new pump and the third time he came to install the pump. He then left and the dishwasher completed the cycle buy the water remained. I took matters...
Dishwasher drain
[ 1 Answers ]
Should the water in the bottom of a dishwasher drain out all the way
Dishwasher will not drain
[ 7 Answers ]
I've had my dishwasher for over 7 years, and it will not drain anymore. I disconnected it from the drain, and put water back through it. The water moved through the dishwasher fine and drained. I then snaked the drain, and found no clogs. I re-connected everything and put water back in the...
Dishwasher won't drain
[ 3 Answers ]
Sears Kenmore Canadian 615.13492 Drain line/hose is free and clear, as are undersink pipes (air lock) 4 wire harness into motor, so it's a reversing motor for pump out. View more questions Search
|