Ask Experts Questions for FREE Help !
Ask
    sfallin's Avatar
    sfallin Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 7, 2008, 10:16 AM
    Engine shut down cable/bar assy on handle of push mower
    My "shut-off" cable and bar came off... how do I reassemble this apparatus?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Apr 7, 2008, 10:26 AM
    Lots of missing information.

    Look up the model of your lawn mower at www3.sears.com and find out what pieces are missing. The screws and nuts are likely missing. Use their diagrams to re-assemble.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #3

    Apr 7, 2008, 07:57 PM
    Place the tang on the cable through the hole in the bail handle, then put one end into the handlebars, then press the other side just enough to allow you to put the other side of the bail handle into the other hole.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Moen single lever shower handle hard to push/pull open/close [ 2 Answers ]

I have a Moen single lever shower handle that is very hard to push/pull open or close. The fixture is approx. 15 years old. I replaced the plastic handle (it was broken inside) and tried to squirt penetrating oil in the valve which had no effect. If I take off the plate can I access and...

Craftsman push mower [ 1 Answers ]

Our craftsman push mower starts by pull string, then putts out, does not stay idle. The gas and oil are good, also a new spark plug was put in. any suggestions.

Push mower quitting. [ 1 Answers ]

Hi, I just got my mower (5hp Briggs) out for the first time this year and refilled the oil and fuel. Started great then after about 5-10 minutes (about the time it should've been warmed up), it would kind of bog down and quit running. White smoke was coming out of the exaust and from the top of...

Push Mower Trouble [ 3 Answers ]

I tried to start my mower today and after a couple of pulls on the rope it locked up. I can not pull the rope nor can I turn the blade. Can someone help? Thanks

View more questions Search