Ask Experts Questions for FREE Help !
Ask
    Tinad's Avatar
    Tinad Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 5, 2008, 11:13 AM
    Quote Originally Posted by jon61
    My weed eater brand lawn mower will not start. I used it a couple of weeks ago but now it won't run. It did get caught out in a sudden pouring rain after I used it and then ran an errand and it rained before I got back. I drained all the gas and replaced it, replaced the spark plug, cleaned the air filter and cleaned the carb. Last week before I did all of that it ran for about 10 seconds and then died but now nothing.
    My lawn mower did the same thing. I did not leave it out in the rain. It is over 10 years old. Did you ever get yours fixed?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    Apr 5, 2008, 11:43 AM
    Question moved here due to piggy backing on another's posting.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #3

    Apr 5, 2008, 11:44 AM
    Tinad, welcome to Ask Me Help Desk. I moved your question here so you could have your own posting. Now, do you have spark?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Scag Mower will not start [ 2 Answers ]

I have a Scag Turf Tiger with a Kohler 22 hp engine. It will turn over but will not start. It is getting fuel and there is spark to both plugs. What could be the problem?

Mower won't start [ 2 Answers ]

I have a Bolens 4.5 mower probably less than 2 yrs old. I've checked the fire from the coil and I have consistent fire, I can hear the compression. I just need to know how I inspect this carb to see if it needs rebuilding. Also where would I get the rebuild kit. Any help would be appreciated as...

Mower won't start. [ 9 Answers ]

All, I was working on the wiring on my mower, because a white wire was disconnected. It smoked from the flywheel area. I thought it was the coil, replaced that. It still doesn't start. It will turn over continually no problem. Just doesn't fire up. Could it be a switch, wiring, any ideas? ...


View more questions Search