Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Lead toilet flange
[ 8 Answers ]
I removed my old toilet to replace it and the old flange was a brass ring and a lead flange bent over the ring the lead flange is connected to a copper waste line. I straightened the lead out carefully and removed the brass ring and replaced some of the floor. Now I want to put a new flange in. ...
Lead Bend Toilet Flange
[ 4 Answers ]
I think I have a real problem. In a bathroom remodel the plumbers left a 4" lead bend with about 6 inches above the new floor height. The tiling contractor cut the lead bend even with the floor, (about 1/4 inch above the tile). I gather from other wuestions that I don't have enough lead pipe to...
1930 toilet flange / lead pipe problem
[ 2 Answers ]
I have a home that was built in the 1930s. I have a problem with the toilet on my first floor. When the water supply to the toilet is on water leaks through the floor to the basement below. Here are some random facts: The floor in the bathroom is original tile. The floor doesn't appear to be...
Replacing a toilet flange with a lead connection
[ 6 Answers ]
I am about to pull up my old toilet and take a close look at what's underneath. I am also going to go over the original plank sub-floor with fresh 3/8" ply (followed later with thin lauan for eventual linoleum) there is a visible floor patch from an old repair. Given the fact that there has been a... View more questions Search
|