Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Harbor Breeze Remote Issue
[ 13 Answers ]
I have three ceiling fans that I installed a couple of years ago with the remote control. I had them all set to the same freq. so one remote contolled them all and I have had not problems until now. After leaving for a week on vacation we got back and none of the three fans will respond to the...
Harbor Breeze Ceiling fan w/remote light issue
[ 12 Answers ]
Thank you for this wonderful forum! I have a newly installed Harbor Breeze ceiling fan w/remote and no pull chain. Wishing now I got the one with the chain.. There was a dimmer in the wall switch where the fan operates from so we swapped it for a normal one. The fan works fine with the...
Hunter Fan Remote #27148 issue
[ 7 Answers ]
I installed 2 Berkeley fans with remote 27148 in separate bedrooms with different DIP switch frequencies. One runs perfectly with no noise. The other one has a buzzing noise when the light and fan are off. When I turn the fan on high, the buzz goes away. It is wired through a dual switch but I...
Ceiling fan w/light and remote issue!
[ 2 Answers ]
My ceiling fan and light are hooked up to a remote and there is no other switch in the house that can control it. I have the same fan and light in two rooms. All of a sudden the light and fans are dimming then getting bright and constantly cahnging. Any ideas on what to do??
Ceiling fan w/ remote issue...
[ 4 Answers ]
I bought some long life fluorescent lights for my fan with remote. After I tried to power the lights on it flashed on, then off. Now, neither the fan nor the lights will power on with the remote or the pull strings. It only occurred after this happened that the lights won't work with dimmers. ... View more questions Search
|