Ask Experts Questions for FREE Help !
Ask
    chignutt's Avatar
    chignutt Posts: 10, Reputation: 1
    New Member
     
    #1

    Mar 27, 2008, 12:30 PM
    Shower light
    I would like to install a light over the shower I installed in the basement but I do not know what type to use.if I first run the source through a GFCI can I use a regular recessed light fixture or does it need to be one that is waterproof or something.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Mar 27, 2008, 12:41 PM
    You can use a regular 5" or 6" recessed can and a shower trim.

    It does not need GFI protection, unless you want it.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #3

    Mar 29, 2008, 07:27 AM
    Read the light fixture's manufacturer's instructions.

    Most require GFI protection if installed in a shower or above a tub.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #4

    Mar 29, 2008, 08:11 AM
    Quote Originally Posted by tkrussell
    Most require GFI protection if installed in a shower or above a tub.
    Seriously?
    I have never seen this in all my years. If you can find something please post a link. Now I am curious.

    I have however seen it on bath fans when installed over tubs. Most manufacturers DO require GFI protection in that case.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #5

    Mar 29, 2008, 09:06 AM
    As that may be the case that recess lights may not require GFI protection any longer, better to direct any installer to read instructions.

    Probably with the use of nonmetallic trims, etc. manufacturers no longer state that it is needed.

    There is not nor ever will be a home I wire that has a shower light without GFI protection. While the code lists minimums and maximums,exceeding the code is wise when reasonable.

    Ans as always, check with local city, county, and state codes for changes and additions to the NEC.

    I understand, for example, Washington state requires GFI protection for shower lights regardless of what the manufacturer states.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Recommendations - Bath Shower Light & Heater/Vent Fan [ 3 Answers ]

I’m planning a major bathroom remodel in a 40 year-old house. The current bath has a tub/shower. I plan to remove the tub and have a walk-in tiled shower installed. I plan to remove the current built-in lavatory cabinet and use a free-standing furniture-type lavatory cabinet. The current tub/shower...

Hampton Bay Lighting - Upper Light Does Not Work But Low Light Does [ 4 Answers ]

I have a Hampton Bay Fan that has a fan, upper lighting and lower lighting with a remote model UC7078T. The remote works for the fan and lower lighting but not the upper lighting. This means the remote and fan are on the same frequency. I've confirmed that the bulbs are all good. Can't find a...

Water leaking from upstairs shower through light fixture below [ 1 Answers ]

A couple of weeks ago I noticed the light fixture globe in our kitchen was 1/3 filled with water. At the time - someone was showering. I removed the globe, emptied it and have not used the shower or light switch since. The home is only 7 years old - original bathroom, shower. Question:...

Recessed light in shower, GFI? [ 5 Answers ]

Hi there. I I want to put a recessed light above my shower, does it need to be gfi protected? If so, what is the easiest way to do this, since it can't be on the bathrooms regular light circuit. I was thinking switchleg out of the bathroom gfi receptacle? Also, my panel is on the opposite...

Light at own home produces sound when light at neighbor's house is switched on [ 4 Answers ]

I've moved into an apartment. I noticed that whenever I switched on my fluorescence light and when my neighbor switches on his light, my fluorescence light would produce a 'rrrrr' or 'mmm' sound which sometimes can be loud and irritating. I have tried changing the light bulb and even the ballast...


View more questions Search