Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
MDBH965AWS MAYTAG DISHWASHER not running at all, no lights, nothing!
[ 1 Answers ]
Two week old maytag just stopped working. No lights on panel, no nothing. Checked breaker, checked connection behind lower panel, and checked local power switch on wall (installed to keep kids fingers from unwanted operation of dishwasher). All OK! Now what. In warranty, just hate waiting for...
Maytag Dryer gets new coil set lights igniter then nothing
[ 2 Answers ]
Maytag DG410 igniter lights then gas comes on but won't stay on , Replaced coil set but wires were not the same colors , so I matched the coils as they came out of the old coils ! The one coil clicks but no gas lights I know I have gas at the valve IT lit once before I changed the coils I may not...
1994 MGM, Parking lights and side marker lights not working?
[ 5 Answers ]
MY parking lights and side marker lights are not working, also my gauge lights are not working. When I press the brakes, all my lights work, my headlights also work and my turn signals and hazard lights turn on, but my inside gauge lights, side marker lights, and parking lights are not on. What...
Maytag Refrigerator Lights Have Gone Out
[ 1 Answers ]
I have a Maytag Plus Refrigerator, Model MTF2456AE and lights have gone out in freezer and refrigerator. I have replaced all the bulbs and still no luck. Can I fix myself? Is there a fuse that might have gone out? Do I need to call a repairman? :confused:
3 lights ran between 2 3-ways, can one of these lights be controlled by a 3rd switch?
[ 2 Answers ]
There are 3 lights connected, 2 in one room and the third at the bottom of the stairs. There is a 3-way at the top of the stairs and another in the room with the 2 lights. This guy would like to also be able to switch off just the 3rd light at the bottom of the stairs. I did not dig into this too... View more questions Search
|