Ask Experts Questions for FREE Help !
Ask
    ERL's Avatar
    ERL Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 26, 2006, 02:48 PM
    Kenore dryer signal
    I have a Kenmore electric dryer series 70. The dryer stops when it is supposed to but the signal continues to sound till the door is opened. Everything else seems normal. Any suggestions would be appreciated.
    applguy's Avatar
    applguy Posts: 324, Reputation: 23
    Full Member
    		  
    #2

    Feb 28, 2006, 09:39 PM
    You have a bad drive motor switch. The contact of the centrifugal switch that stops the buzzer is welded; this contact has nothing to do with anything but the buzzer. If you can find a used motor (very common motor), you could rob the switch to replace yours. If you've got the gumption, sometimes (if you're mechanically inclined and careful) you might be able to remove the switch from the motor, disassemble it, and clean the contacts. Or maybe just disconnect the buzzer to shut it up. If you need help, let me know.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Monitor = no signal need help [ 13 Answers ]

Prepare for a possibly long detailed description of my problem. OK first off... it seems there's lots of people with this problem but not many solutions (I haven't found anyone that's said "thanks it works now")... I even googled stuff like "no signal from monitor" (which is how I found this...

Pc problem no signal [ 1 Answers ]

I install a video card, and memory and received a no signal message from the monitor, what is the problem.

No Monitor Signal [ 12 Answers ]

Hello, I recently tried to install a Radeon 9550 256mb AGP, on a compaq. Being the idiot I am I did not uninstall the on-board video first, I inserted the videocard and now I get no signal to the monitor, I have tried removing the Radeon and using the onboard video again, but still no picture. All...

No Signal [ 3 Answers ]

Just built a new system. Pretty sure most of the specs are irrelevant except that you should know it's onboard video. So far the best I can come up with is that it's a faulty motherboard. Basically what happens is... nothing. I hook everything up, power up the computer and... nothing. Nothing...

View more questions Search