Ask Experts Questions for FREE Help !
Ask
    sharplaw1's Avatar
    sharplaw1 Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 23, 2008, 09:36 AM
    How to Prime irrigation pump
    The installer put a Jet-Rite 2 well tank where the priming tee is. There does not seem to be anyplace where I can fill pump and piping with water. The pump has not been used in about 1 month and was unplugged. Now it needs to be primed and I don't know what to do!

    Can someone please help!
    David Shortliff's Avatar
    David Shortliff Posts: 1, Reputation: 1
    New Member
     
    #2

    Mar 27, 2008, 10:24 AM
    Quote Originally Posted by sharplaw1
    The installer put a Jet-Rite 2 well tank where the priming tee is. There does not seem to be anyplace where i can fill pump and piping with water. The pump has not been used in about 1 month and was unplugged. Now it needs to be primed and I don't know what to do!

    Can someone please help!
    How do I prime a water pump?
    tacodawg's Avatar
    tacodawg Posts: 9, Reputation: 1
    New Member
     
    #3

    Mar 29, 2008, 07:54 PM
    I don't know how everybody else does it,but I have a double hose bib on my sprinkler pump,and when I need to prime it ,I just hook a washing machine hose (or a double ended female connector) to one side of the hose bib on the pump,and the other to my city water and I turn the water on, make sure that the pump side of the hose bib is open,so that water from city(house) can flow into pump,and I turn the pump on. You can hear the pump when it starts to prime and when it does turn off the hose to the city(house)water. And dis-connect. Make sure that the irrigation lines are open when doing this,so that the air can escape. I have been doing this for 10 years now when the water table gets too low, and priming the pump is a must, and it has not failed me yet , good luck! OOPs I just noticed you saying there was no priming tee?Is there a pvc pipe on it anywhere to splice into?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do you prime a pump? [ 5 Answers ]

Can somebody tell me how to prime a sprinkler pump the right way? I have 2 cut-off valves on my system. The first one leads to the pump, and the other valve leads to the cylinder shaped thing with the five tubes on it... My question is: do I close the 2nd valve and open the first valve to let water...

How do I prime a well pump [ 10 Answers ]

We have been without power for over 10 hrs and now I have no water. I was told I need to prime the well pump but I don't know how. I have never had this problem before. Can Anyone one help. The holding tank is inside the pump its self is out side.

How do I prime my water pump? [ 2 Answers ]

Hello I live in a rental property with one water source that supplies 2 units. Our power went out today and now the water does not work. The pump will need to be primed now to get the water running again, but I'm not sure how to do that. I cannot get in touch with the landlord right now and I...

Pump prime [ 2 Answers ]

I lost my prime on the pump for my home well. My question is how to prime?


View more questions Search