Ask Experts Questions for FREE Help !
Ask
    jwagnppp's Avatar
    jwagnppp Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 26, 2008, 03:32 PM
    Kitchen aid dryer tumbles but doesn't heat.
    Kitchen aid dryer tumbles but doesn't heat.
    Must I call a repair person? Or can I try something
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Mar 26, 2008, 03:37 PM
    Gas or electric? If its gas check the ignitor, if its electric check for 240 volts not just a single 120 v. You should have two wires, blackand red, that each show 120 connected to the ground.
    kewlness1's Avatar
    kewlness1 Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Mar 26, 2008, 03:54 PM
    If its electric it sounds like the heating element went out. The element can be replaced. I
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kitchen Aid Dishwasher blinking lights [ 18 Answers ]

I currently have a Kitchen Aid Dishwasher with the rinse only cancel lights blinking with no responses from the touch panel. What I did was recycle the power, tried to put it in diagnostic and no thing happened. Need some help?

My dryer only works on low heat and not on high heat. [ 1 Answers ]

I have Whirlpool dryer model #TEDX640EQ1. The dryer does not produce any heat when on the high heat setting, but will get warm on the low heat setting. I need the high heat setting to work so that it doesn't take 2 cycles or more to properly dry my clothes. Anyone know what the problem could...

Amana Gas Dryer won't heat on heat cycle [ 2 Answers ]

I have an Amana gas dryer about 10 years old. The dryer will heat and the timer will advance on the timer cycle but it will not heat on the heat/more heat cycle. I have cleaned the lint vent entirely. I can see the ignitor get red hot and then ignites the gas on the timed setting. I am not sure...

Sears Kenmore tumbles, but no heat [ 5 Answers ]

I have a Sears Kenmore dryer tumbles but no heat I replaced the Hi limit theremo and check the heating element. I am getting a ohm reading on the heating element but it does not heat up. Any help would be appreciated. Thanks MS

View more questions Search