Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New hot water heater installed, but no hot water pressure. Plenty of cold water?
[ 11 Answers ]
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
Low hot water pressure through the whole house even ater replacing water heater
[ 2 Answers ]
I'm still experiencing low hot water pressure even after replacing the water heater. When you first turn on the faucets the pressure will be fine but within a few seconds it drops again.
Surging water pressure & leaking water heater relief valve
[ 19 Answers ]
Just recently the pressure of our water in the house surges when we turn a faucet on, and the city water company verified that our pressure in the house when we open a faucet is higher than the pressure in the lines in the street, and after the water runs is at a normal pressure (meaning their...
Gas water heater pressure release valve leaking water
[ 14 Answers ]
Hello all, I have a slight issue with my gas water heater. It's a AO Smith 32.75 gallon type. All of a sudden, water is coming out of the relief valve pipe. I have placed a coffee can there, and I have to empty it out every few hours now. Im not sure where to turn for this one, as I have...
New hot water tank installed, loss of water pressure
[ 1 Answers ]
After the installation of a new hot water tank, we have less pressure which is only noticeable when trying to fill the tub. Any ideas? Thank you. View more questions Search
|