Ask Experts Questions for FREE Help !
Ask
    sevans's Avatar
    sevans Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 25, 2008, 06:21 AM
    Gas heating
    My gas furnish will start then shut off. The blower for the exhale will start, then the heat element will glow to start the burners, then the burner blower will start but after a few seconds it will shut off. What do you think? I’m hoping it is just the thermostat. I haven’t had the change to jump the wires but I’ll do it tonight. What could it be if it’s still not working when I jump the wire from the thermostat?
    Steven
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Mar 25, 2008, 12:17 PM
    Clean your flame sensor. Use sand paper or steel wool. It is located near the pilot. EASY does it because you can break the ceramic base.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas heating [ 1 Answers ]

Hi, I've moved recently to my new home,of which I am very happy in. The problem that I have got is,that my new home has a living gas fire in the lounge,which is beautiful,but is so expensive to run,that I would love to know how I can convert it into a focal point in my home,as it can't be used as...

Gas Heating [ 2 Answers ]

When I woke this morning I discovered that my heat is not coming through the vents only cold air? What's happening?

Cost of converting electric heating to gas heating [ 2 Answers ]

I am buying a house with electric heat. I have heard it can be a lot more expensive than gas. What would be the cost of converting the house to gas heating and a/c?

Electric heating to gas heating conversion [ 1 Answers ]

Hi All, I am new to the site and wanted to know if anyone could assist me with a general quote for electric heating to gas heating conversion on one floor of a three story apartment building. Here are the specifics: 1000 square foot area; 8 rooms; 6 electric baseboards. Thanks.

View more questions Search