Ask Experts Questions for FREE Help !
Ask
    SueCee711's Avatar
    SueCee711 Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 20, 2008, 05:21 PM
    How high should a shower head be from the floor?
    I would like to know if there is a standard in the industry for how high a shower head (arm) should be from the floor?
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
     
    #2

    Mar 20, 2008, 05:31 PM
    I don't know what the standard height should be but they are always too high for me as I'm short. I just bought a hose style shower head and mounted it on the wall much lower than the original shower fixture with a special adapter that I bought to hold the hose so I can have a shower at MY height, not their height.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #3

    Mar 20, 2008, 05:34 PM
    Hi Suecee:

    6'8" or 80 inches to center of shower arm off finished floor is the industry standard. The shower arm is bent which lowers the shower head so most people can reach to adjust.

    I also apply coomon sense when installing shower arm height..if short people, I reduce rough in to 78". If tall people I might increase to 82". BUT I would not reduce to say 72" because people are only 5 feet tall... that would be a problem for next people moving in. SO, standard practice is as I just presented. Standard rough in standard... 80" off finish floor... ;)

    Hope that helped. If it did please RATE THIS ANSWER. Thank you... Mark


    .

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rain shower head & handheld shower head problem [ 4 Answers ]

I have a shower with 2 pipes for showers heads (one on the wall in front, and one on a side wall). The wall in front has a rain shower head on it. The wall to the side has a hand held shower head attached. The pipe with the hand held shower attached has a push button valve to turn the handheld on...

The water in my shower will not switch from the shower head to the tub spout? [ 5 Answers ]

I recently purchased a small home, that I am getting ready to rent out the problem is I get water from the shower head just fine, but I get not water from the tub spout, any ideas?

Shower head leaking from bottom of head [ 1 Answers ]

I am trying to install a new hand held shower head and I put a washer into the wall part and stopped it from coming out of there but now the water sprays out of the bottom of the head instead of coming out of the actual head

1st floor ceiling leak below 2nd floor shower [ 2 Answers ]

Our ceiling has developed a swelling or bubble in the ceiling and when touched-it literally fell apart and created a hole. It is dry to the touch but happens to be right in line with our 2nd floor master bedroom shower where the plumbing probably comes down. The shower has a plastic floor with a...

Replace shower Plumbing Valve assembly shower head 2 knobs [ 3 Answers ]

In a fiberglass corner shower shell. What I have is an old leaking rusted Shower valve assembly. It leaks from the Shower head that is a hand sprayer with a wall mount from the sprayer. It also leaks around the both the hot and cold water wall mount knobs. The cold water knob the sleeve that...


View more questions Search