Ask Experts Questions for FREE Help !
Ask
    claudiaswt's Avatar
    claudiaswt Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 18, 2008, 05:19 PM
    Kenmore series 70
    My washing machine model is kenmore 70 series and serial number is SM 971 0804-A. The belt was broken. I ordered another one. I tried to unscrew and put the belt back in but couldn't because it is bigger than the hole. Is there any way that I am able to get the manual? Any suggestions will be greatly appreciated.
    biggsie's Avatar
    biggsie Posts: 1,267, Reputation: 125
    Ultra Member
    		  
    #2

    Mar 18, 2008, 05:58 PM
    This is a pretty good site -- it would help if you could give model number

    Is this a top loading machine -- or the front loader

    Appliance Parts from RepairClinic.com - Appliance Repair Tips & Help

    From the other post you tried to get an answer to this question

    There are no belts, it has a transmission. I check for loose belts or worn, but did not find any. I was reading from someone else problem, they too, wash and drains, but does not spin, but goes through the cycle, and finishes. The answer was to check the lid switch, could that be my problem too. Waiting for answer

    Could be the couplers. Yes check the lid switch for continuity. Checking further these unit did have a timer issue. Also a bad motor or transmisson or clutch will also cause these symptoms.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dryer 90 series [ 2 Answers ]

Hi all, I have little experience with trouble shooting appliances so my first question is going to be kind of silly to those that have even a little experience. I have a Kenmore 90 series @ 10 years old and it isn't heating. Everything else seems to be working properly. At first I assumed it...

Kenmore 70 series [ 2 Answers ]

Have a Kenmore 70 (110.20722990 ) that will not spin out at the end of a regular cycle. If I rotate the dial 360 to spin and push time dial in it will spin out. I should also say, I have to open and close the lid just before pushing in the dial at spin. Just had a new switch put in this year for...

Kenmore HD 80 series dryer [ 1 Answers ]

Do you know if they break down. I need to bring the dryer down a cellar that is 25 inches wide.

Kenmore washer 70 series [ 0 Answers ]

:( belt came off how do I put it back on correctly, because I don't have the manual or the money to pay someone to do it.

View more questions Search