Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    gilunionhall's Avatar
    gilunionhall Posts: 4, Reputation: 1
    New Member
    		  
    #21

    Mar 8, 2008, 10:37 AM
    Hello everyone -

    Just a follow-up to the "loose handle" situation.

    Moen sent me a box of parts - 95606

    It included a new handle, hub and set screw -- the items had been re-designed.

    It went on w/o a problem, we'll see how eveything works.

    I only wish we had bought all moen fixture when we built our house!

    Gil
    jcman2001's Avatar
    jcman2001 Posts: 1, Reputation: 1
    New Member
    		  
    #22

    Mar 17, 2008, 12:59 PM
    There are certain types of lock washers you can buy and slide on the screw for the faucet. That will eliminate the problem of the faucet coming loose
    gilunionhall's Avatar
    gilunionhall Posts: 4, Reputation: 1
    New Member
    		  
    #23

    Mar 17, 2008, 01:24 PM
    Hello jcman2001 -

    In reference to your "lock washers" post - I don't think this particular problem could be solved with a lock washer - moen redesigned the hub, set screw and handle because the hole in the hub would enlarge and prevent a secure connection.

    Gil
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Moen one handle , pressure prob. [ 16 Answers ]

Hi, I have a MOEN faucet , ever since I installed it I was never happy with the pressure , now after 8 years it seemed worse so I took it apart to see if the screens were dirty , nothing there , when the handle is not on the flexible hose , I turn on water and I notice that when on the cold side ,...

Removing handle from a Moen single-handle shower [ 5 Answers ]

The shower is dripping and I am trying to get to the stem by removing the handle. I can see a set screw recessed into the bottom of the handle. I have tried an allen wrench but bent it without any success.

Moen Single Handle Sprayer [ 2 Answers ]

I have a moen removeable single handle sprayer and suddenly the sprayer stopped working. The faucet works fine otherwise except when you press the button to spray it won't spray. I removed the rubber piece for the button sprayer and nothing seems to be broken or missing. Does anyone have any...

Moen single handle diverter replacement [ 1 Answers ]

Can anyone tell me how to replace a diverter on a single handle moen kitchen faucet?

Moen two handle faucet - no cold water [ 3 Answers ]

Hi all, I have a whirlpool tub with a 2 handle Moen faucet that apparently worked fine earlier this week (thinking about it, I have never used this tub since moving in close to 2 years ago!). The problem is the cold water handle only delivers a trickle of water. I have found the water...

View more questions Search