Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Connecting an expansion tank to a water heater
[ 4 Answers ]
I recently replaced my water heater. It now seeps occasionally from the pressure relief valve. I plan to add an expansion tank. Can I connect the expansion tank to the water heater by using a drain valve at the bottom of the water heater? Usually it is connected to the cold water inlet, but since...
Water heater expansion tank
[ 2 Answers ]
I have a four year old water heater that is leaking out the pressure release down tube and there is an expansion tank fixed to the cold side. I tested the pressure on the expansion tank and it reads 0.00. Is there supposed to be some amount of pressure reading in the expansion tank or can I add...
Water Heater Expansion Tank
[ 1 Answers ]
It's me again. I meant an under the air conditioner hot water heater. The current one is 31" high. It has an expansion tank, but I was told it wasn't necessary. I'm in a second floor condo. Is it really necessary and if so, why? Thanks a lot.
Water heater expansion tank
[ 2 Answers ]
I need a new water heater and one plumber says the expansion tank on the side is not necessary. Is it? What is the average cost of a 40 gal, under air water heater already hard wired? 2nd floor. Thanks
Water heater expansion tank
[ 4 Answers ]
Read a post here concerning the water line back flow preventer/expansion tank and am familiar with its operation and purpose when using city water. My question is, is this setup recommended or even needed on a well water system? My feeling is that the holding tank would take up any expansion. ... View more questions Search
|