Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Sistering Floor Joists
[ 3 Answers ]
I removed my bathroom floor, toilet, and shower/tub combo due to water damage. Some of the floor joists have some water damage as well. In reading here about sistering floor joists, I should sister the joist two feet past the existing water damage on each end. When that is done, should I cut out...
Spongy floor joists causing sagging floor
[ 3 Answers ]
Hello. In front of my fireplace there is a small tiled area. This is surrounded by hardwood which runs throughout the living room. The floor on the sides of the tile has dropped slightly below the level of the tile (about 1/8" or so). The wood floor around the tiles is also a bit spongy when...
Floor Joists
[ 1 Answers ]
Hi folks, hopefully someone has a very easy answer to this... We are about to remove 2 chimney breasts that are situated on the side of our house - they make for odd shaped rooms and as we've halved our space with a recent downsize, along with damp coming through, it seems like the easiest option....
Holes in floor joists
[ 4 Answers ]
Hi, We are adding a new addition to our current home. The plumber is putting in the plumbing and he has hacked away about 4 inches from our new floor joices. We are now concerned about the structure and the integrity of that. Its for a new bathroom with a toilet and a biddet and all floor tile....
Proper underlayment for vinyl floor starting at floor joists
[ 2 Answers ]
What is the proper way to build up a floor to prepare for vinyl flooring? I'm building a mud-room in the garage attached to the house, 5' by 13' . Presently I have the joists installed and am ready for subfloor. I am planning to use 3/4" T&G UDL plywood, glued to joists with construction... View more questions Search
|