Ask Experts Questions for FREE Help !
Ask
    Moser's Avatar
    Moser Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 16, 2008, 01:18 PM
    Hampton Bay Ceiling Fan housing won't come down
    We have a Hampton Bay ceiling fan that we need to get off the ceiling. We have installed and removed many ceiling fans over the years, but this one is a problem. The builder did not leave the instructions after installing the unit 7 years ago.

    After picking away at this thing most of the day, we're left with the upper decrative cover and the part that attaches to the fixture box. These two pieces are held together by 6 screws the heads of which are covered by the bottom of the piece that covers the fixture box in the ceiling. These are the only pieces left to remove - the tube the wires come through and the motor have both been removed. We've tried twisting, pushing up and twisting - everything. There are no visible screws to get the fixture cover piece off the ceiling - and no place for it to go out of the way if we did. Any ideas would be greatly appreciated! :confused:
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Mar 16, 2008, 09:16 PM
    The part closest to the ceiling has a decorative ring that hides the screws. It twists off.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan-light works-fan doesn't [ 6 Answers ]

I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan. I attached...

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?

View more questions Search