Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Rheem RACB-030JAS residential A/C unit condenser fan motor replaced
[ 26 Answers ]
I just replaced the condenser fan motor and it initially spun up then stopped, after 10 minutes it ran again then stopped. Now I can hear it buzz then stop but not spin. The original motor was a GE 5KCP39BG K075CS 1/6 HP 1075 RPM 208/230 V its replacement a Dayton 4M205G 1/4 hp 1075 RPM ...
Rheem unit
[ 2 Answers ]
Hi can anyone help me I have this rheem unit and now that I turn the heat on the heat pump outside only cames on when I go to the unit and reset the unit by pushing the red buton on the side Thank you
Rheem a/c unit. Everything is Burning
[ 6 Answers ]
Hi I have a Rheem a/c-heating unit. The pipe comniong from my air handler and also the condenser outside-I think that it what it's called- are both VERY hot. This is an all of a sudden thing. My unit was working fine @5:00pm today and now @ 8:30pm it is blowing hot air. All my intake filters in the...
Rheem Split Unit A/C not cooling properly
[ 1 Answers ]
I have a Rheem split unit heater / ac RGDG-075AUER. It appear to be from 1994 based upon the serial number CB5D302-F1994-1196. The unit does not provide proper cooling for my townhome. When the AC is turned on it will initially blow cool air, but eventually the air appears warmer as if only a fan...
Hooking up an older 2 wire T87F to Rheem air handler
[ 3 Answers ]
Hi, Some Background: I have a Rheem heat pump air handler that used to be in my house and now I'm trying to install it in my shop. I removed the A/C coils and disconnected one of the heat strips. All that is left is a blower and 9.6kw heating strip. I was going to use the Rheem thermostat but I... View more questions Search
|