Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I "connect 1/2" copper to 1/2" flexible plastic"? Anyone?
[ 5 Answers ]
Hello Experts... Amateur (very amateur!! ) plumber needing some advice: Bought an old 2 1/2 storey house, and somebody ran some copper into the uninsulated side attic to feed the hot & cold water to a sink. This might not be a problem in California, but it sure is North of the border in...
Connecting 1 1/2" ABS to 1 1/4" pipe
[ 4 Answers ]
Can I trust a flexible fitting to connect 1 1/2" ABS to existing 1 1/4" pipe, which is sold in the retail outlets for a closed wall bathroom drain? Do these flexible connectors with torque down clamps provide durable connections that will last without leaks?
Broken Concrete trap "Drainage Pipe"
[ 1 Answers ]
I recently bought a house with a unfinished basement bath. I have since decided to finish the bathroom but have ran into a bit of a problem. The previous owners set all of the drains up and I have since found a large hole in the trap of a secondary drain that drains into the main. To explain it...
Copper tubing off my ABS drain in basement
[ 1 Answers ]
Afternoon, I am putting a shower in the basement and have already identified my drain and vent. Here is the question-- on my drain pipe, which is ABS, I have a copper line with a fitting on it tied to the coupling on my drain. It appears to be heading over toward my vent line. I have looked...
Sautering 2" copper to 2" brass
[ 2 Answers ]
Note sure if this is the right forum... my husband is in construction at work right now and they have asked me to find out how to sauter 2" copper to 2" brass? Is this possible... if so how? :D Thanks for any input. CORRECTION: What material do you use to fill in when sautering copper to... View more questions Search
|