Ask Experts Questions for FREE Help !
Ask
    RLgoner's Avatar
    RLgoner Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Mar 11, 2008, 06:56 PM
    Won't stay lit
    My ignition lite is on. But it goes to start and ignites for only about 30 seconds and goes back out, but the little flame stays on.what does this mean?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Mar 11, 2008, 07:03 PM
    Brand of furnace?

    Model number of furnace?
    RLgoner's Avatar
    RLgoner Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Mar 11, 2008, 07:15 PM
    It's a carrier model. Model number 58GC100-1-C. THANKU
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Mar 11, 2008, 07:20 PM
    Does this furnace have a 2 or 3 wire pilot?

    The wires will be right below the pilot lite assemble.
    RLgoner's Avatar
    RLgoner Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Mar 11, 2008, 07:31 PM
    Im Not Sure I Looked I See Lots Of Wires And Then There Are Four Things That Lead Behind The Single Flame The Burners Maybe And There Are Four Of Those
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #6

    Mar 11, 2008, 08:03 PM
    The wires will be going directly into the pilot if you have that style.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My pilot light won't stay lit [ 6 Answers ]

Help,I have two problems.. My upstairs furnace pilot light will light,and after holding down the pilot button for about 3-4 minutes(it says one minute,but it won't stay lit after only one)it stays,but will go out again in a day or two... The furnace for the downstairs won't light at all.. I can't...

Gas furnace pilot won't stay lit [ 1 Answers ]

About 1 month ago pilo light wouldn't stay lit so I replaced the thermocouple.. The unit worked fine for about 2 weeks. After that when relighting it would go out after 1 day or so. Bought a new thermocouple and this one would only keep the pilot lit for 1 to 2 hours. Reinstalled the thermocouple I...

Ignitor lights but burners won't stay lit [ 2 Answers ]

I have a GMP gas furnace, the ignitor lights, the burners light for about 15 secs. Then go out and try to re-light after about 30 secs. Ocassionly staying lit it's a 50-50 chance here. What do I need to do to correct this problem? Thanks for the help.

Pilot light won't stay lit [ 2 Answers ]

I have a Bryant Heater on upstairs ofmy central unit. I can light my pilot light and the unit will start heating. The it shuts off. The fan continues to blow and the heater still works, but the pilot light goes out and has to be re-lit. Is that the thermocouple? I have a Bryant 394had036050...

Tempstar electronic pilot won't stay lit! [ 9 Answers ]

I have a tempstar sp80 furnace. Last heating season I started having problems with the pilot not working. If I wiggle the ignition harness the pilot would light and stay on until the temperature matched the thermostat then would not turn back on when the temp dropped. Now when I wiggle the harness...

View more questions Search