Ask Experts Questions for FREE Help !
Ask
    irishmick7's Avatar
    irishmick7 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 11, 2008, 07:32 AM
    How do I connect wires from Janitrol to the Honeywell Thermostat
    How do I connect the wires from a Janitrol to the Honeywell RTH7500 Thermostat. I have the following wires:

    R Red
    Y Yellow
    G Green
    O Orange
    W2 White
    E Beige/Pink
    C Blue
    Black wire not connected

    I connected it to the Honeywell as follows:

    Red to R which has a jumper to RC
    Yellow to Y
    Green to G
    Orange to O/B
    White to W2/Aux
    Beige/Pink to E/Y2
    Blue to C
    Black not connected

    It is not working, the unit will not turn on for A/C or Heat
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Mar 11, 2008, 01:56 PM
    Check to se if you have 24 volts at the thermostat. During wiring you might have caused a fuse on the board to blow.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat wiring diagram; janitrol 7W/honeywell 5W [ 1 Answers ]

What is the wiring layout from the Janitrol hpt 18-60 to the Honeywell RTH230B?

How to connect wires to a RTH6300B honeywell thermostat [ 2 Answers ]

I only have 2 wires to connect I removed the old wires from the W and R connection And put them on the new one but nothing happens. Any help would be appreciated

Wires on honeywell thermostat T8411R [ 2 Answers ]

I was painting my wall and I decided to remove my thermostat off the mounting plate, after I finish I put it back but it didn't work anymore, so I check the wires and noticed a black wire that was loose, all the other wires were in place, so I tried to tight those but a think I accidentally touch...

Replacing Janitrol Thermostat with Honeywell Thermostat [ 1 Answers ]

I am attempting to replace my manual Janitrol Model HPT 18-60 thermostat with a Honeywell Programmable Model CT3500 thermostat. My Heat Pump is a Trane TWR012-042C The 6 wires connected to the Janitrol thermostate are: Y, W2, G, R, O, C How do I connect these six wires to the Honeywell that...

Matching wires on new honeywell thermostat [ 1 Answers ]

My old thermostat was janitrol HPT 18-60 and wires were: Y (yellow) G (orange) R (Red) O (orange) W2 (white) E (Black) C (Blue) I just bought a Honeywell #RTH6300B. Their wires are: G,W,Y, R,RC. How can I match them up? Do I need the "O" on the old one? We are only getting hot air now by...

View more questions Search