Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adheering brick veneer to interior painted masonry wall
[ 3 Answers ]
I live in 1937 era Washington DC Rowhouse and I've been considering installing the bring veneer on my longest interior wall. The wall in question is masonry(painted). I have seen the instructions for a few of the brick veneer companies and they mention using a lathing system or using mortar in the...
Removing veneer
[ 1 Answers ]
I have an old bureau which has several areas where the veneer is peeling off and missing - can I remove it all as it is past fixing and if so how do I take it off and how should I treat the wood underneath thank you
Natural stone veneer
[ 4 Answers ]
I'm planning to build a split face granite stone wall around my garage. Can anyone give me the ratio (shovels of sand, cement and/or mortar) to add for the mix. It's been years since I laid up a stone wall and don't remember it for sure. Also, any tips on cracking a stone, such as how to read the...
Replacing/repairing Veneer
[ 1 Answers ]
Hello! I just purchased a secretary from a second hand store. I am not sure of the wood; however, it is a majestic and heavy piece. I noticed on the drawer fronts that they are veneer and are not in good shape. I'm thinking about removing the veneer and replacing it. Is this something a novice...
Veneer
[ 2 Answers ]
I have found an old trundle sewing machine. The veneer has been water damaged and is going to have to be replaced. I want to know specifically how to put veneer down, how to cut it so it fits exactly, how to glue it and anything else I need to know. pollyscrab View more questions Search
|