Ask Experts Questions for FREE Help !
Ask
    cgreer8's Avatar
    cgreer8 Posts: 34, Reputation: 2
    Junior Member
    		  
    #1

    Mar 10, 2008, 03:03 PM
    Installing serpintine belt
    1997 chevy cavalier new gator belt will not go on properly. The tensioner always takes distance away instead of creating the proper gap required to install belt. Please help
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Mar 10, 2008, 03:08 PM
    Either one of two things here, either the wrong belt, or the wrong routing of the belt.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #3

    Mar 10, 2008, 04:39 PM
    You have to hold the tensioner back with a wrench in order to install the belt. The tensioner making the ID larger is the only way to have tension on the belt.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #4

    Mar 11, 2008, 06:52 PM
    The belt routing is critical.

    Name: 1a.gif Views: 89 Size: 4.6 KB

    I hope this helps.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I need to replace my deck belt on my troybilt 17hr. 42' deck belt diagram [ 4 Answers ]

I need to replace my deck belt on troybilt 17hr. 42' riding lawnmover. Be nice to have a diagram

Belt diagram murray 17 hp 42 inch belt [ 4 Answers ]

I boke the primary belt on my murray 17 hp 42 inch mower and I can't seem to remember how it went on,please help.:o

V-belt twisting [ 6 Answers ]

When ever I engage my auger on my Sears snowthrower, The V-Belt twists upsidedown and burns. I did just replace it to what I thought was the correct size. I was very tight to get on. Did I get a too small belt? Is this why it is twisting?:(

Timing belt? [ 2 Answers ]

My 1992 honda civics engine light came on. My car boggs with an irratic idle when I stop at lights. Noise and vibration in distributor cap. Could this be a timing belt problem or should I just do a tune up?

Which Belt Do I Need? [ 2 Answers ]

I have a ford yt16h tractor and need the secondary drive belt but can't find what size it is. Can anyone help me? Hanks, tom

View more questions Search