Ask Experts Questions for FREE Help !
Ask
    samsubmerged's Avatar
    samsubmerged Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 8, 2008, 07:27 PM
    Trane YCC low heat
    We have a Trane YCC combined heat and AC unit (gas/electric) that has had some servicing recently after a couple of problems with the heating system. Now the unit is running properly (blower working, furnace producing heat from exhaust) but we have at best, low warm air coming into the house. The air flow is good and there are no leaks in the duct work, it seems be more a problem with exchanging heat inside the unit. It worked fine a week or so ago, hot air coming from vents but now we cannot get the temp inside the house above 60 degree even after running the unit all night. Any suggestions?

    :confused:
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Mar 8, 2008, 07:51 PM
    ((that has had some servicing recently))

    Call the company back and tell them your furnace is not working correctly. Usually they will run a call for free as a customer service since they just fixed it.

    What kind of gas/ natural or propane.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #3

    Mar 8, 2008, 07:55 PM
    It sounds like your unit is faulting out for some reason. The unit will give you a code on the control board if your trying to heat and its blowing cold air. You need to count the number of blinks from the light on the control board to see what's wrong.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane XE 1200 Heat Pump [ 4 Answers ]

I have a Trane XE 1200 Heat Pump and am trying to install a programmable Honeywell RTH7500 thermostat and have an extra wire. The previous thermostat was a manual Trane. I connected the Blue wire to the C terminal, the Yellow wire to the Y terminal, the Green wire to the G terminal, the Orange...

My dryer only works on low heat and not on high heat. [ 1 Answers ]

I have Whirlpool dryer model #TEDX640EQ1. The dryer does not produce any heat when on the high heat setting, but will get warm on the low heat setting. I need the high heat setting to work so that it doesn't take 2 cycles or more to properly dry my clothes. Anyone know what the problem could...

Schematic for trane heat pump [ 1 Answers ]

I have a TRANE XR13 2TWR3024 heat pump. The schematic drawing, that came with the unit, shows a circuit board labeled DFC. There are no details on the drawing except the contacts of three relays, K1, K2 and K3. Can someone tell me how these three relays are controlled or if a complete schematic is...

Trane XV 90 won't heat [ 3 Answers ]

Trane XV 90 won't heat. Fan runs, but just recirculates the (cold) air. I checked the covers on the unit -- they are in contact with the pressure switch. Brrr. Thermostat set to 68; inside temp is 59.

View more questions Search