Ask Experts Questions for FREE Help !
Ask
    mycomputerhelper's Avatar
    mycomputerhelper Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 5, 2008, 08:46 AM
    No Signal with new video card
    My monitor gave me an error message that said " no signal" . So I bought a new video card. I installed it and tried to load the software but my screen still says no signal. I also tried to hook up another monitor and received the same message. Any suggestions?

    Thank you:) :(
    Scottish2008's Avatar
    Scottish2008 Posts: 501, Reputation: 32
    Senior Member
     
    #2

    Mar 5, 2008, 09:26 AM
    Was this a new system you rebuilt? If so I had the same problem but fixed it. I had my DVD writer plugged in the wrong place. Just a though. I am no expert
    jstrike's Avatar
    jstrike Posts: 418, Reputation: 44
    Full Member
     
    #3

    Mar 7, 2008, 08:11 AM
    Try using the video cable on another computer that you know works.
    seahwk83's Avatar
    seahwk83 Posts: 3,276, Reputation: 212
    Ultra Member
     
    #4

    Mar 7, 2008, 05:09 PM
    If you tried another working monitor and a new card, it would indicate your video card slot may be bad. If you have an agp card, you can always try to get a pci video card to see if that would work. If it is an pci card to start with, try putting it in other slots

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I want a new video card [ 21 Answers ]

I don't know too much about video cards so I figured I would ask for some advice. I like to play a lot of games. I've been interested in a few games for PC only to find out that my video card isn't supported. (Example Black and White 2 won't work because my video card doesn't support pixel...

What is the PCI-E Video Card equivalent to this AGP Video Card? [ 4 Answers ]

I'm in a turmoil to either upgrade my AGP Video Card to another AGP or a PCI-E. Most of you will say upgrade a motherboard that has a PCI-E slot, but that means upgrading everything else including memory, video card, MAYBE CPU - and that could mean a whole lot because I don't want to buy a cheap...

No video no signal [ 5 Answers ]

I had a problem with the video of my computer. There was no screen, it was blank. I tried the monitor on another computer and it worked. I also tried a different monitor on the same computer and it didn't work, so I determined it to be the box. The motherboard has a built in video card, serial,...

Video card [ 2 Answers ]

Hello, The problem is that I can't get anymore than 16 colors. I have purchased two different VGA card with cd holding the software (drivers). Here's my PC info please help Thanks .

No video signal [ 6 Answers ]

I picked up a hewlett packard 6343 has video on board and when I boot up monitor receives no signal input. I tried disabling on board video and put in a pci card that is brand new and still no signal. Any help will be appreciated. Thanks Paul


View more questions Search