Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Increasing the water flow of a Moen shower head
[ 5 Answers ]
I have just installed new bathroom fixtures, Moen brand. I have tried to increase the pressure of the shower head. I have taken out the O ring in the top and I have unscrewed the face of the head. I have not been able to remove the head or remove the plastic in the neck. I don't want to break it...
Moen: water always coming from shower head when faucet is on.
[ 10 Answers ]
Hi, I just installed a moen l82839 shower/tub assembly. The problem I am having is that when I turn on the water, just to the tub, water comes from the shower head. The knob that turns on the shower head on the faucet is down, noting is leaking otherwise. I don't know what's wrong. Its like there...
No Hot Water in Shower - Moen Single Handle Faucet
[ 38 Answers ]
I've read most of the questions on this website about this matter, but I'm still confused. I pulled off the handle and wall plate. But what do I do after that? I see a small (4 inch approx.) hole in the wall with a "unit" that looks like a cartridge that holds the handle. I can turn it to hot...
No hot water from Moen Single handle shower valve
[ 2 Answers ]
I am getting no hot water from my Moen single handle shower valve. I have plenty of pressure from cold water side. I removed the main handle to expose the valve. The hot water pipe has a small valve with a common head valve stem which I turned, hoping to unblock the valve, but this had no...
Loss of hot water in Moen Shower facet - single, pull handle
[ 8 Answers ]
I have lost significant pressure in my shower equipped with a Moen single handle pull out and rotate - R or L. I have a 2nd shower with identical unit - swapped cartridge - no change. Pulled out the posi-pressure valve on the hot side and found some debries, no change in pressure, may be worst.... View more questions Search
|