Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Conduit sizing
[ 1 Answers ]
I have 4 conductor tray cable , 3 number two and one # 6 bare ground in a jacketed tray cable, would 1 1/2 rigid conduit be suficient for this application, it runs about 200 ft
Conduit pipe
[ 5 Answers ]
Is there an inexpensive meter to test if a conduit metal pipe is hot. I dropped a metal piece on the pipe or the outlet box and it sparked. May be a broken hot wire is charging the conduit pipe??
Conduit usage in shop/barn
[ 2 Answers ]
I am wiring a large barn/shop building. I will be using emt conduit for most of the wiring, but do I need it up above 8 feet for the lighting. I would prefer to just run something flexible to the lights from a box. The lights are up in high bays. Is there an inexpensive flexible conduit that you...
Do I need conduit?
[ 4 Answers ]
I have a panel in my garage for my garage based workshop. I want to run a 220 volt circuit (have have the capacity in the panel to do so). My question is whether I need to run the wire inside conduit or can I run romex without conduit. The wire will be behind drywall the entire way so it will...
Conduit sizing?
[ 4 Answers ]
Hi all! I am relocating my breaker box approx 30 feet from its original location. Installing splice box in the old location for connections. My question is : I have 14 12-2 and 3 12-3 to pull from new box to splice box what size conduit do I need so not to worry about heat build up or de-rating... View more questions Search
|