Ask Experts Questions for FREE Help !
Ask
    bmjohnso9192's Avatar
    bmjohnso9192 Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Feb 27, 2008, 01:38 PM
    Hooking up a new thermostat
    Hello there. I have a question about replacing an old honeywell dial thermostat with a new Honeywell Thermostat model rth230b. I have a red, green and white wire. So far, I have it programmed, and hooked up this way... I put the red wire in the Rh, Rc, empty, White in W, and Green in G, y empty. I have hot water heat and no AC. I was just wondering if I had this hooked up correctly! I have never done anything like this before! Thank you in advance!
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 27, 2008, 02:12 PM
    You have to jump RHand RC for the fan to work on the fan switch depending on your desire. See pages 1/4 and 2/4 for a explanation of this.

    Link to manual on line.


    http://customer.honeywell.com/techli...0s/69-1800.pdf
    bmjohnso9192's Avatar
    bmjohnso9192 Posts: 8, Reputation: 1
    New Member
    		  
    #3

    Feb 27, 2008, 05:44 PM
    Thank you!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hooking up 2 Pole Thermostat with 14/3 Wire [ 5 Answers ]

Hello, I recently had some remodeling done in my home were the existing wiring was left in place, but the old thermostats were thrown away. My electrician is on Vacation for a week and it is getting cold in that part of the house. I have 120/240V Electric Baseboard Heaters and 14/3 Wire ran from...

Hooking up a new thermostat but old thermostat has a white and a black wire? [ 2 Answers ]

Everything I look at indicates a white and red wire for the connecting wires. Our thermostat is probably original to our home (1943). It has two wires. It is difficult to tell but it looks like one is a white wire and the other is black. I've tried looking on the internet for some info however...

Hooking Ac to Dc [ 1 Answers ]

I have a unit that is 110v, this needs to be hooked up to a switch on my hot tub that is 110v DC Will there be a problem or is there some sort of converter to be used? John :eek:

View more questions Search