Ask Experts Questions for FREE Help !
Ask
    nanatraci's Avatar
    nanatraci Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 27, 2008, 02:01 PM
    Maytag Neptune dryer wiring
    I have a Maytag Neptune Dryer MDL# MDE5500AZW I took it apart to recover a piece of jewellery and put it back together without attaching the wiring lines back to the door switch.:o I can not remember how they re-attach. As I assume one is a ground and the other two are power feeds... I do not want to attempt this without knowing. There are 3 prongs and three wiring lines. Can anyone tell how they go back on or suggest somewhere to find out?
    topladyj's Avatar
    topladyj Posts: 323, Reputation: 13
    Full Member
    		  
    #2

    Feb 27, 2008, 02:44 PM
    Call one of your local either repair shops or dryer places they should be able to help no problem. I had some problems with my wires and tried to go get a harness. They should be able to help. Well needless to say my dryer wiring caught on fire and it was the wires it had been working fine for about a year. My bofriend went out to the garage and we had a foot high of flames under the dryer not to mention it was right next to our gas line. If we would have let it go any longer the whole house would have blowen up. So I would definitely be careful call a repair shop. Good luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytag Neptune Dryer has no heat [ 4 Answers ]

I have a Maytag Neptune electric dryer Model# MDE4000AYW, Serial # 28635363YK. I had dried a load of clothes (that took a normal amount of time to dry) and put in a second load to dry. After about three hours I realized the dryer was still running (Yes, I am one of those people that sometimes...

Maytag Neptune dryer not drying well. [ 6 Answers ]

I have a Maytag Neptune dryer and it doesn't dry well at all. I am used to putting big loads in it and I don't know if it's too big of loads or what but like 7-10 pairs of jeans and it takes at least 5 hours to dry them... if then. The sensor seems to work but shuts itself off before they are...

Maytag Neptune dryer doesn't dry [ 1 Answers ]

My Maytag Neptune dryer doesn't dry cloths. It tumbles but seems no air enters the dryer. Can't tell if it is a problem with the thermistor, fan or heating element. How do I go about troubleshooting the problem.

View more questions Search