Ask Experts Questions for FREE Help !
Ask
    kagetsuki_yuu's Avatar
    kagetsuki_yuu Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 26, 2008, 06:25 PM
    Lathe machine
    Ah, can u help me to know what are the different factors when using a lathe machine... tnx for those who will help me...
    Scleros's Avatar
    Scleros Posts: 2,165, Reputation: 262
    Hardware Expert
    		  
    #2

    Feb 26, 2008, 06:30 PM
    Read How To Use a Lathe from American Machine Tools Corp. and then post back here if you have specific questions.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Galvanized pipe replace shower& tub valves, adobe house with lathe and plaster walls [ 2 Answers ]

I have an old adobe house, (forty years old), with lathe and plaster and adobe walls. I have galvanized pipes and need to replace the valves in the showers and tub. The stems are not available, (obsolete), what to do? I hired a plumber he ordered the parts then late last night said I should find...

Washing Machine Drain- How high can machine lift H2O [ 1 Answers ]

Hi... Thinking about moving the washer down in the basement but the main sewer drain leaving the house is about 2' off the floor. There is currently a sewer lift installed for downstairs toilet that complicated cutting into the existing drain for new Y. Without getting to detailed, there is an...

Toilet closest to washing machine gurgles and backs up when washing machine drains. [ 2 Answers ]

When the washing machine drains, the toilet in the next room gurgles and the bowl partially fills. I have taken these steps: Ran hose down vent pipe on roof. No backup noticed. Had plumber snake from outside wall cleanout by washing machine and 1/2 bath toilet to city sewer line in alley,...

View more questions Search