Ask Experts Questions for FREE Help !
Ask
    dmurray3's Avatar
    dmurray3 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 26, 2008, 03:52 PM
    Goodman furnace will not ignite
    I have a Goodman GMPN080-4 Rev 4 furnace and it will not ignite. I believe the, not sure about the tech term, flat bar that turns red hot like a stove coil has gone bad (it does nothing). I see a red LED light on the computer type panel blink 3 quick, 2 sec pause, 3 quick, 2 sec pause and so on. Any help would be greatly appreciated.

    D
    Tom Fisher's Avatar
    Tom Fisher Posts: 4, Reputation: 1
    New Member
    		  
    #2

    Feb 26, 2008, 05:58 PM
    Have a look whether there a trouble shooter on the back of the bottom panel.
    mdm99's Avatar
    mdm99 Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Mar 1, 2008, 05:03 PM
    3 flashes says its pressure swith closed with flue venter off. Check your pressure switch. The bottom panel has that info on it.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #4

    Mar 1, 2008, 07:27 PM
    You may have a stuck pressure switch you can blow and suck lightly on the rubber tubes going to the pressure switch to free it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My furnace won't ignite [ 5 Answers ]

I'm trying to find out why my furnace won't ignite. The pilot light is on, I can hear something turn off when I checked the breaker and it came back on when I turned the breaker back on. If I turn the fan to on it works. I'm thinking it's the thermo coupler but I don't know how to test that. ...

Goodman Gas pack won't ignite [ 1 Answers ]

I have a Goodman Gas pack, model # GPG10300701A, the exhaust bloewr on the side will come on as usual but the unit will not ignite. Usually when it comes on it will tick tick ignite, but I am not getting the spark(tick), its like there is no attempt to ignite. I keep seeing quotes about LED blink...

Goodman GMP125-4 starts up but does not ignite [ 3 Answers ]

I have a Janitrol / Goodman GMP125-4 gas furnace. Two years ago we replaced the motor, capacitor and the venter blower assembly. Last year (Nov 2006) we replaced the thermostat with a Honeywell programmable thermostat and then followed that with replacing the original integrated circuit module...

Goodman furnace will not ignite [ 3 Answers ]

:confused: I just bought this goodman furnace Followed the directions to convert it to lp gas. Put it on so the heat will kick on. The blower blows and the ignitor glows but doesn't ignite the flame. Now I lit it with a torch it lights but it is a horrible yellow flame. Does anybody have any...

View more questions Search