Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wire Motor for 220 outlet Power from 110 power
[ 1 Answers ]
I need to wire this sander for 220 power and do not understand the diagram well enough. Currently I believe it is wired for 110 shown in picture. Please advise about correct wiring for 220. Thank you 2 attachments
Outlet Controlled by a Switch
[ 4 Answers ]
I replaced the electrical outlets in a room I recently had dry-walled. One of the outlets I replaced was partially (1 of the 2 receptacles) controlled by a wall switch. I hooked the new outlet up exactly as the old one was, but now the outlet is on all of the time. The wall switch no longer...
GFI Outlet Has No Power
[ 4 Answers ]
I have a GFI outlet in my garage that has no power. It displays a yellow light; all of my other GFI outlets display a green light. There are two buttons on the outlet; I can press one to disable the outlet, the other turns it back on, and it displays the yellow light, with no power. There are...
Wiring Remote Controlled fan to Three-Way Wall Switch
[ 23 Answers ]
We recently purchased a couple of Hunter ceiling fans which came with remotes. I didn't realize this at the time, but supposedly you can't hard-wire the fans to three-way wall switches because they came with remotes. The problem with this is we have to fumble for the remote every time we go to our...
3 lights ran between 2 3-ways, can one of these lights be controlled by a 3rd switch?
[ 2 Answers ]
There are 3 lights connected, 2 in one room and the third at the bottom of the stairs. There is a 3-way at the top of the stairs and another in the room with the 2 lights. This guy would like to also be able to switch off just the 3rd light at the bottom of the stairs. I did not dig into this too... View more questions Search
|