Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Calibrating an Airguide auto compass
[ 8 Answers ]
I have an Airguide compass for my car but have lost the instructions. How do you set it up. It is the basic model with suction cups and a round globe on a square base
System does not react to thermostat, thermostat set to off, AC still runs.
[ 3 Answers ]
We had a new AC system put in this summer. I turned it off as the weather moderated, but even though the thermostat is set to off, the AC runs. It also looks like the heat does not run. It was chilly last night and I turned the thermostat to heat on and set the temperature appopriately, but no...
Replacing Analog Thermostat with Non-Programmable Digital Thermostat
[ 1 Answers ]
Replacing Analog thermostat with White, Yellow, Red, & Black wiring with non-programmable digital thermostat Model #RTH3100C. Please help!!
Hooking up a new thermostat but old thermostat has a white and a black wire?
[ 2 Answers ]
Everything I look at indicates a white and red wire for the connecting wires. Our thermostat is probably original to our home (1943). It has two wires. It is difficult to tell but it looks like one is a white wire and the other is black. I've tried looking on the internet for some info however...
Calibrating clamp temp probe?
[ 8 Answers ]
I have a UEI Multi meter and use a pipe clamp type temp sensor for Superheat and Subcooling... How can I make sure it is accurate? Would it be internal on my Electric meter or on the Clamp? I can't seem to find any info. I know reg temp sensor ice water would be good for 32*. Can I get the clamp... View more questions Search
|