Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to offset vanity drain?
[ 3 Answers ]
Hi, Installing a new vanity. Drain pipe is mounted in the wall directly between the hot and cold water supply valves. Sink drain in new vanity top is offset 7" to the left of the wall drain pipe. I intend to install pipe coming out from the wall with a 90 degree bend and an extension to...
Installing offset toilet flange
[ 1 Answers ]
The 2x10 floor joist in right in the middle of where I want the center of the flange to be, how much of the floor joist can I legally remove so the offset flange will fit?
Offset cast iron toilet flange
[ 3 Answers ]
I am remodeling an early seventies ranch built on slab. One bathroom has an offset flange of cast iron. There is only one t-bolt slot, located on the offset side. There is no place for a t-bolt on the 'close' side. The flange does not appear to be damaged, although there was a lot of rust that I...
Toilet offset
[ 1 Answers ]
I bought an old house that's on a concrete slab. I want to replace the tub with a better one that's 36" by 72". The problem is that the toilet is in the way. If I could move it 6 inches sideways... 8 inches would be even better... could install the new bathtub. Any ideas? Anyone ever seen... View more questions Search
|