Ask Experts Questions for FREE Help !
Ask
    storme101's Avatar
    storme101 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 12, 2007, 07:20 PM
    Jewelry sauter
    Am looking for the correct sauter to fix sterling silver jewelry. Where can I find this. I am new doing the repair.
    firmbeliever's Avatar
    firmbeliever Posts: 2,919, Reputation: 463
    Ultra Member
     
    #2

    Sep 13, 2007, 02:45 AM
    -----------------------
    Clean Sterling Silver Jewelry How To Guide
    Knowing how to clean and care for your Sterling Silver Jewelry is not as simple as you may think. These instructional tips give you the know how on cleaning your sterling silver properly with out damaging the finish and making your items last from generation to generation.

    Step #1: Deciding on the proper cleaning products to use is some what confusing and extremely important. Choosing products such as: bleach, ammonia, alcohol, acetone, and other such products can damage your Sterling Silver beyond repair. Stay with a mild cleaner and be sure to dilute them with water (just to be safe). Some good home products to use are: baking soda, non abrasive tooth paste, mild phosphate free detergents as well as commercial silver cleaners.

    Step #2: Choosing a cleaning brush. Be careful on the type of brushes you choose to deep clean Sterling Silver. Stay away from hard bristle brushes with horsehair and abrasive style brushes. The best cleaning brushes to use may be a baby tooth brush, a mushroom brush, very soft bristle toothbrush also consider using a sunshine cloth, which can be used wet or dry.

    Note: When cleaning Sterling Silver always clean up and down motion NOT in circular motion.

    Step #3: When drying your sterling silver jewelry choosing the proper cloth material should be taken very carefully. Use 100% cotton materials such as: old T-shirts, sweat shirts, cotton balls, soft flannel materials (all unbleached), and silver wipes. Using these types of home and commercial materials can help prevent your Sterling Silver from being scratched or even completely damaged.

    There are many misconceptions on what to do to keep your precious Sterling Silver Clean and lustrous. Following the steps provided will insure your Sterling Silver will be taken care of properly and will last a lifetime.
    ------------------------------------------------

    I was not sure what you meant by sauter your jewellery,
    I hope the above article helps in some way.If not please do explain what you did mean and maybe we could help you.:)
    rawpotatoeater37's Avatar
    rawpotatoeater37 Posts: 244, Reputation: 8
    Full Member
     
    #3

    Sep 18, 2007, 10:41 AM
    You're actually looking for 'solder'. It's used with high heat to conjoin two pieces of metal (and yes, it's spelled weirdly :) )

    Solder is sold a many number of places. I personally trust Rio Grande (riogrande.com), but it takes a while to set up an account with them and for just solder, I would look online for another source.

    You can get wire or sheet solder, it's not a big problem. But you DO want to get the lead-free solder if you're working with silver. You do not want stained glass solder; that would just be bad all around haha. There are also three different types: hard, medium and soft. Hard has the highest melting point and is the strongest solder. It's good for joints that are pretty crucial, like holding pin backings on or supporting weight and stuff. Soft has the lowest melting point and is usually used for decorative stuff that won't have a lot of pressure on it, as it's also the weakest (but still strong) solder. Medium (obviously) is in the middle.

    The best thing to do is think about your joint that needs to be soldered and see how much pressure is going to be there. If it's really important (like holding everything together), use medium or hard. If it's more of a decorative something, then use medium or easy. To be honest, you could probably just buy medium and get away with it.

    Also another thing (and don't take this the wrong way, it's just a polite question): Do you know how to solder? I would recommend not doing it without supervision for at least the first few times.

    Good luck and feel free comment back if you have anymore questions about what I said or anything else!
    Val_apple's Avatar
    Val_apple Posts: 3, Reputation: 1
    New Member
     
    #4

    Feb 19, 2008, 10:22 AM
    I pierced my tongue 4days ago,and I haven't been eating.. expect yogurt,cold chocolate.. (lots of dairy products basically)now I've read below that you shouldn't go near dairy products! all food carries bacteria though,and if you use mouthwash after to disinfect it won't the outcome be the same?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Jewelry [ 3 Answers ]

:D Can you tell me all about mood rings?:D

E Etsitty jewelry [ 2 Answers ]

I have an opal and sterling silver necklace with the hallmark E Ettsitty. The references to Etsitty on the net seem to refer to Navajo jewelry. What is known about an E Etsitty jewelry maker?

Jewelry Etiquette [ 7 Answers ]

Which hand do you wear a past present & future ring on? Does it take the place of my wedding set, worn with my wedding band or wore on my right hand 4th finger?

Jewelry Making [ 5 Answers ]

Does anyone know any good books that will assist me in learning jewelry making?

Jewelry appraiser [ 1 Answers ]

Need a jeweler to appraise a 6.1 caret alexandrite any one know of one


View more questions Search