Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Drain King Nozzle Stuck in Drain Pipe
[ 8 Answers ]
I have a Drain King #501 nozzle stuck in a 1-1/2 drain pipe at a T joint. The nozzle and hose inserted easily past the joint for several feet and cleared the clog in the drain pipe. I turned off the water and was able to pull the hose out until the nozzle came to the joint. It will not come out...
Ok to tie a wet bar drain into a drain pipe coming from 1st floor.
[ 6 Answers ]
I'm finishing my basement in a newer house and want to add a wet bar. There is a 2" PVC drain pipe coming from the 1st floor that is for the washing machine drain. It has a clean out plug on it also. Can I just add a wye or Santee for the bar drain and do I need an Air Admittance Valve for venting....
Vent pipe turned into drain pipe and drain pipe into vent pipe
[ 3 Answers ]
I recently began to remodel my laundry room. I wanted to move the washing machine 3 ft from its current spot. When I removed the sheet rock I found that the vent pipe is between the current washing machine drain and where I am moving my washing machine. I wanted to avoid breaking into the slab....
Tapping in new drain pipe to old sewer pipe
[ 2 Answers ]
I want to install a new tub and shower in my basement. The old shower in the basement drained through a pvc pipe that ran on top of the basement floor directly to our floor drain. I have excavated a channel from the proposed tub site to the sewer pipe running from the first floor toilet to the...
Bathroom sink wall pipe drain pipe
[ 2 Answers ]
My house was built in early 70's.. No plastic.. I'm putting in a new sink and had to remove the wall pipe that goes into the wall.. I needed a longer one. It seem where it goes in behind the wall into the plumbing there was some type of gasket as pieces of it fell out when I removed the pipe.. I... View more questions Search
|