Ask Experts Questions for FREE Help !
Ask
    Kpinn's Avatar
    Kpinn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 15, 2008, 10:52 PM
    Durozone Dampers
    I am designing a two zone heating system that has three dampers on zone 1 and one damper on zone 2. I am using a duroZone control board and durozone dampers and would like to know how many individual dampers can I connect to each zone. Will the zone control board power three dampers on a single zone, or may I only put one single damper on each zone. If I can only put one damper on a single zone, I will need to make the 1st zone into three zones that operate in parallel and are driven off a single thermostat. I am hoping that all three dampers need for the 1st zone can be driven of the 1st zone using the same terminals on the zone control board.

    Stumped - never did this before.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 15, 2008, 11:08 PM
    My suggestion is to go to the factory web site. They have much more information on there product than we ever could. They also have a phone number so you can talk to one of there engineers.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #3

    Feb 16, 2008, 07:12 PM
    They make a add on board for multi dampers. I have installed three on one circuit with no problems. Just be sure to give the 24v power on the control board its own transformer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Problems with my durozone dampers [ 1 Answers ]

Several years ago I had a small addition added to my home. We decided to have the addition heated on a separate zone. The heating guy added 3 dampers to our existing venting system (1 to the new venting to the addition, the other 2 to close of the vents to the existing house). The first year...

Adjusting/locating dampers [ 1 Answers ]

I have been told that my A/C probably isn't big enough for my house, however, that there are dampers that can be manipulated to move air differently so that I can more of the cool air directed to the upstairs vs downstairs. There is literally a 20+ degree temperature distance in the two areas...

24v transformer to dampers keeps blowing [ 1 Answers ]

I've quickly blown two 110 to 24v 40va transformers. This transformer powers the electronic dampers from my furnace. I have 2 zones, 2 thermostats. I've also had problems blowing the 3amp fuse in my furnace itself when activating my zone 2 thermostat. All three of my damper motors test out OK,...

View more questions Search