 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hey guys, I have read all the various questions about blowers and a/c and auto and wiring. My furnace blower stays on all the time and I can't find a "Fan" switch anywhere. I see that I only have two black and white wires into my thermostat and gawd only knows what the limit switch looks like and...
My blower will not run it just makes a loud humming sound I'm sure I may need to replace it. And I know I can but I don’t know where to start to look for the part new or used
Hello, I have a 15 year old gas fired furnace. I recently changed the old White-Rogers thermostat to a digital non-programmable one.. I connected all the wires (5 wires) White to white, yellow to yellow, red to RC, and Black to R, and green to green. The problem I'm having is being able to run...
When the blower starts up it seems to have a hard time getting started. (makes a noise like: wa... wa... wa.. wa) and then runs normally. Doesn't do this every time but maybe one out of four starts. Is motor going or some other reason? Thanks
I have a York furnace and ac unit. The blower won't come on. :mad: The blower motor works I found that no power was going to the blower so I by passed it to stay on all the time. :cool: What I need to know know is what is causing it there is a Honeywell circuit board (ST9120b 1005)...
View more questions Search
|
