Ask Experts Questions for FREE Help !
Ask
    lucky1955's Avatar
    lucky1955 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 8, 2008, 11:29 PM
    How to install a toilet flange?
    Never had to install one. How do I go about it?


    Thanks
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #2

    Feb 9, 2008, 12:25 AM
    The following search would be a good place to start. There seems to be plenty of information out there on the Internet concerning installing one. How to Install a Toilet Flange - Google Search
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Feb 9, 2008, 05:59 AM
    Quote Originally Posted by lucky1955
    Never had to install one. How do I go about it?


    Thanks
    Before we can help we have to know the material the pipes and flange are made of. Are you replacing one or will this be a new installation? Let's hear back from you. Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I install a new toilet (closet) flange over subfloor? [ 10 Answers ]

First off, please forgive me if I don't get the terminology correct. I am decent at home repair but have no real training other than trial and error. I'm trying to re-do my kids' bathroom, which has not been updated since the house was built. I removed the old tile floor and mortar bed and...

Cast iron toilet flange the bolt holes will not hold how do we fix it and the flange [ 1 Answers ]

We have a cast iron flange and the bolt holes are not useable can we cut off the top and add a new plastic flange

How do I install basement closet flange, with no rough in? [ 1 Answers ]

After I find the soil pipe, which will likely be cast, can I knock a hole in it and use a saddle, and cover it all with concrete?

Toilet Flange [ 1 Answers ]

On a 3 x 4 closet bend, after installing the 6" length piece through the floor. Later, cut the piece through the floor off, even with the floor. Then my question is, the proper way to install the toilet flange. Do you glue the toilet flange into place and screw it to the floor? By the way it is in...

Closet flange install [ 1 Answers ]

I have a two-part question on installing a closet flange. My house is a mid-60’s split-level and I replaced all the copper DWV with PVC. The main drain is 3” and I used a 4” to 3” closet ell. I had to remove the old flooring down to the joists, replace with new plywood, and cut holes for the ell...

View more questions Search