Ask Experts Questions for FREE Help !
Ask
    John Holveck's Avatar
    John Holveck Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 8, 2008, 06:33 PM
    Lincoln Weldanpower WP 225G7
    I have a Lincoln Weldanpower Model: WP225G7, Code:9317, Serial #:A1128723. I don't use it too often but when I need it, I need it. It has some rust in the gas tank that keeps stopping up the filter. Lately I spend more time changing the filter than I do welding. I have drained the gas tank and cleaned it with muratic acid which helped for awhile but it rusted back again. There are no leaks in the tank. I would like to buy a new tank but the local welding shop says that they are out of production-any suggestion?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Feb 8, 2008, 07:12 PM
    Yep.

    Caswell Inc. - Epoxy Gas Tank Sealer
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #3

    Feb 8, 2008, 07:35 PM
    Try the sealer kiss spoke of.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Early 1990's Lincoln Weldanpower 225 [ 16 Answers ]

I'm about to purchase a used Weldanpower 225. It was the model prior to the Lincoln Ranger 8 and is powered by a single cylinder 16 hp Briggs and Stratton gasoline engine. Does anyone know anything about this particular model welder... the goods... the bads... etc. Should I buy it or shy away...

Lincoln Weldanpower G8000 [ 2 Answers ]

My buddy gave me an old G8000 and under the cover I have three wires that I don't know where they go , all three come out of the altenater , two short fat ones and a long thinner one with a open end loop term. the others have eye term. the two short ones look like they might ground to the reactor...

1973 lincoln [ 2 Answers ]

Where is the starter located on a 1973 Lincoln continental mk IV?

Lincoln Weldanpower 225 [ 1 Answers ]

I recently purchased a Lincoln Weldanpower 225 and the current transformer is bad. I would like to purchase another one with a bad motor that I could use for parts. If anyone knows of one. Thanks

View more questions Search