 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Craftsman 11HP B&G - won't throttle to high
My 11HP Craftsman starts great but will not rev up to high & if I attempt to engage the blades it only crawls at a snail's pace. Does anyone know where I can get a detailed diagram of the throttle control cable & (not sure what it is called) the cable that connects to to the carb to have it rev to high speed on the engine?
|
||||
|
||||
|
|
||||
|
||||
|
My cure for my problem was to clean all the dirt, oily stuff, debris, etc from behind the bowl where the cable should be free. I sprayed it with Blaster, waited awhile & carefully brushed off the gunk. I am now able to rev the engine higher & engage the blades & actually have some power to mow at a higher rate of speed. Of course one should also look under the quill assemblies under the deck where the blades attach & be sure there is no string, wire or other foreign object that is preventing the blades from moving freely. Thanks for the info & the best thing is my cure didn't cost me anything but a little time.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My Sears Craftsman 11hp Lawn Tractor Model #917 254 270 :when engine is running and clutch is disengaged,it will not shift to another gear. You have to turn it off and move tractor back and forth before it will shift into another gear. Any ideas what's causing this and what to do about it? Or, is...
Ok well me and my dad are working on this mower and we bought a new solenoid for it we got it to click but... u know how on the key there is a on and a start? When we turn the key to on it starts for some weird reason when it should be the other way around. Any ideas?
My mower just keeps turning over but not starting up . I have checked everying ,all I know is I was cutting my land and it just died and now will not start . Please help thank you
I have a friend who has an old Craftsman 11hp riding mower and is having some problems. The ignition switch was broken and has been started with a screwdriver until it finally broke. I got a replacement switch today and installed it and now as soon as it is put in the "on" position the engine...
View more questions Search
|
