Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replace galvanized DWV during remodel?
[ 6 Answers ]
I am in the process of remodeling the main bath. I have cast iron mains and it appears to be galvanized steel for the 2 inch lines. In the past I have had slow drains in both the sink and tub and have resorted to both snaking and chemical cleaners. I have the opportunity to replace the...
Patching large section of stucco siding
[ 3 Answers ]
This window was installed by the previous owner, and obviously done wrong. Not much water-proofing to speak of. Anyway, the bathroom inside has a skylight, so I've decided to ditch the window altogether (complete remodel in progress). What are my options in terms of patching this wall up? It's the...
Galvanized pipe replace shower& tub valves, adobe house with lathe and plaster walls
[ 2 Answers ]
I have an old adobe house, (forty years old), with lathe and plaster and adobe walls. I have galvanized pipes and need to replace the valves in the showers and tub. The stems are not available, (obsolete), what to do? I hired a plumber he ordered the parts then late last night said I should find...
Galvanized Pipe Stuck
[ 4 Answers ]
http://mysite.verizon.net/fdraw/pipe.jpg Rusted galvanized pipe nipple is stuck in fitting in wall behind tile under bathroom sink. :( I have tried to remove it with a large pipe wrench, but it won't turn. I looking for any suggestions to get it out without damaging threads in fitting; WD40?...
Must remove concrete floor section to replace rotted rod iron drain pipe in bathroom
[ 1 Answers ]
What is the best way to remove concrete flooring section in a bathroom? We found a broken rotten rod iron drain pipe when tearing out walls for remodeling and unfortunately (blessing) found out the pipe was rotted. Plumber says to replace with PVC but we have to dig up/cut up the floor ourselves.... View more questions Search
|