Ask Experts Questions for FREE Help !
Ask
    kjjml5's Avatar
    kjjml5 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 25, 2008, 10:08 AM
    Gas Fireplace pilot is out
    My gas fireplace was working fine and then it turned off and the pilot is out. We don't know what happened or how to get it started again. Any help would be greatly appreciated. Of course, I can't find the paperwork that came with unit at this time. Unit runs on natural gas which runs under our crawl space.
    Thank you, Kim
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Jan 25, 2008, 02:04 PM
    Hi Kim.

    Usually there is a knob or a push button that controls the pilot gas.

    Without being there and seeing what you have it is difficult to accurately answer your question.
    Cletus the HillBilly's Avatar
    Cletus the HillBilly Posts: 5, Reputation: 1
    New Member
     
    #3

    Apr 15, 2008, 08:44 PM
    Sounds like the thermocouple/pile got too dirty and could no longer produce the millivolts D/C to keep the gas valve open. There is also a possibility that a down draft blew out the pilot, or the pilot orfice got too dirty to dispense gas. It sounds like it's time to call an HVAC service co.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Does putting gas hot water heater dial on PILOT put pilot light out? [ 5 Answers ]

My gas hot water heater dial has OFF to the left, PILOT in the middle and ON to the right. If we are going away and want to not have the water heated can we just turn the dial to PILOT and the flame will stay lit but just won't heat the water or does the flame go out completely and then PILOT would...

Pilot light goes out on gas fireplace about every 10 minutes [ 2 Answers ]

Our pilot light keeps going out on our gas fireplace. It lights fine and we have a full tank of gas. It was working fine and then it started to do this. It could be dirty. How would I clean it. We have had very low tempetures in the past few days. It has never done this in the past. O'Neilmom

Gas fireplace won't lite,pilot light is on [ 7 Answers ]

I turned my gas fireplace on and the pilot lit fine and stays on but I can not get the main fire to go on. I have cleaned the thermocouple and other device on other side of pilot and also tried jumping the thermostat at wall and at fire place but no luck.

Pilot light on gas fireplace [ 1 Answers ]

The pilot light on my gas fireplace is too high I think. How do you adjust the pilot light?


View more questions Search