Ask Experts Questions for FREE Help !
Ask
    vincent_pozh's Avatar
    vincent_pozh Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 23, 2008, 02:30 AM
    Wireless Adaptor not recognized by USB port
    I have Linksys Wireless adaptor which when connected to system on USB port does not get recongnised even after loading the driver. The OS on the computer is XP.
    charliec's Avatar
    charliec Posts: 61, Reputation: 6
    Junior Member
    		  
    #2

    Jan 24, 2008, 11:49 AM
    Try it on another system to see if it the wireless adapter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Linksys wireless network usb device not recognized [ 1 Answers ]

Linksys wireless network usb device not recognized

Replace data/fax port with firewire port [ 2 Answers ]

I want to buy a dell inspiron 531 computer from costco. It has a TV tuner and a 56K PCI Data/Fax Modem. I know the TV tuner uses one of the two available pci slots, but does a data/fax modem use anothwer pci slot? I want to have an open pci slot so I can add a firewire port. If the data/fax uses a...

Configuring a WLAN adaptor [ 8 Answers ]

I have installed a Senao cd plus ext2 wireless PCMCIA card that unfortunately came without an installation CD. I downloaded and installed the drivers, and the Device Manager shows that the card is working. However, without the CD, I am unable to launch the Client Utility that would let me...

AC Adaptor for Nano [ 3 Answers ]

I have just purchased an AC adapter for Apple Nano 2GB. The ac adaptor has following specifications; Ac input 90-260V Output 4.9V to 11V DC I am not sure should I connect it with my Nano or not. Nano can be charged with USB port which gives 5V DC but the new adaptor says 4.9V to 11V....

USB Adaptor in PS/2 Port [ 6 Answers ]

Hello, I have a Fujitsu laptop running Win 98SE and it does not have any USB ports. I have this adaptor that allows me to convert a PS/2 port into a USB port for plugging USB peripherals in. I've run hardware scans, restarted the computer, etc. and I can't get it to recognize the USB adaptor...

View more questions Search